Single Purpose Hi Lo Welding Gauge digunakan untuk:

- Mengukur ketidakselarasan internal (hi-lo misalignment): Mengukur perbedaan tinggi antara dua sambungan pipa untuk memastikan keselarasan yang tepat.

- Mengukur celah penyusunan (fit-up gap): Mengukur jarak atau celah antara bagian-bagian pipa yang akan dilas, biasanya dalam rentang tertentu (misalnya, 1/32" hingga 3/16").

- Memverifikasi keselarasan pipa: Memastikan sambungan pipa rata dan selaras sebelum dan sesudah proses pengelasan.

- Membantu proses inspeksi: Membantu teknisi dan inspektur las untuk memastikan kualitas dan presisi hasil pengelasan sesuai standar.

- Alat bantu untuk berbagai aplikasi: Digunakan pada berbagai proyek seperti konstruksi kapal, bejana tekan, boiler, dan industri minyak dan gas. 

====

[Measure Internal Misalignment]: This is a Hi Lo gauge for measuring size of welding, and it can measure internal misalignment (Range: 0-5/32'' )and fit-up gap ( Range:0-3/16'' ) in Standard Reading Only

[Stainless Steel]: Most of this Hi-Lo gage is made by stainless steel and is will not rust in dry environement and need not any anti-rust methods

[Laser Engraving]: All scales on the Hi-Lo gauge are laser engraving, it is to prevent the scales from wearing out and making the reading easily

[With a Clip]: Every Hi-Lo gauge is with a clip, it is for keep it in your pocket for easy carrying and takge out

[Package and Operating Manual]: Each Hi-Lo Welding Gauge is package in a synthetic leather bag an with a operating manual

Internal Hi-Lo gauge:

4 quick steps check internal alignment

You can check the internal alignment of you fit-up quickly with the Hi-Lo gauge

1. Unlock the retaining screw. press the gauge legs beyond the barrel

2. Insert the legs (wired) into the root gap space or the two pieces of pipe to be fitted, turn the gauge 90°, being careful to apply a constant back pressure to the barrel

3. Hold the gauge as square as possible with the fitting to obtain an accurate reading. lock the retaining screw. reverse the 90° turn and remove the gauge, you're now ready to read the increment opposite the red line

4. When the red line aligns with the 1/32 increment line you have a good internal alignment and fit-up. misalignment can be determined from the zero line by increment marking of 1/16 inch

Rootweld spacing gauge:

Easy operation determines rootweld spacing

1. Unlock the retaining screw and insert the gauge interior alignment stops between the two pieces of pipe to be fitted

2. Insert the leg with the longer taper into the root gap until it makes contact with both slides of the gap.

3. Re-lock the retaining screw, remove the gauge and read it

4. The scale is calibrated in fractional dimensions from 1/32 to 3/16 in 1/16 inch increments, the read-out you receive represents the amount of rootweld gap

Package includes:

Single Purpose Gauge

Leather bag

User manual