Tipe B - 220V

Kami juga menjual berbagai tipe lain: A, B, C, D, X, voltase lain, dll di etalase toko 

====

Product parameters:

Piezoelectric capacity: ac1500v x 1minute

Measured torque: 0.1nxm

Proper specific gravity: above 0.5g/cm3

Working temperature: - 20 ~ 85 ℃

Voltage: 220VAC

Speed: 1 rpm

Probe rod length: 145mm

Power connection capacity: SPDT 5A / 250VAC

Blade material: 304 stainless steel

Case material: aluminum alloy + plastic spraying process

Shelf life: 24 months

Torque 4 gear adjustment

Applications:

Type A Blade: used in sand, stone, cement, heavy chemical raw materials.

Type B Blade: used in food, feed grain, general chemical materials

Type C Blade: used in most materials, C blade and CM welding nut collocation, can achieve convenient installation outside the warehouse.

Type D Blade: used in lower limit detection, D blade and 3cm welding nut collocation, can realize convenient installation outside the warehouse.

Type X Blade: used in PVC, plastic particles, PP powder, wood chips, sawdust, rice husk and other light materials.

General Descriptions:

The RS-10 series full resistance rotary material level switch is a series of resistance rotary material level switches that are widely used at present. It is a material level switch based on the principle of machinery to measure height of objects. In cement production, cement products, concrete products, new wall, plastic manufacturing, chemical industry, food, feed, medicine, environmental protection and many other production areas.

It is widely used.

RS-10 is using the motor to drive the blade to rotate. When the measured medium rises to the position of the blade, the blade is stopped by the dielectric barrier, and then the contact signal of the opening (closed) and closed (open circuit) is output through the chain reaction of the related mechanical mechanism, and the mechanical

⚙️【 QUALITY MATERIAL 】Aluminum alloy shell, solid and reliable. Compact structure and compact shape. Stable performance.

⚙️【 INSTALLATION METHOD 】The installation can be horizontal and vertical installation should be selected according to different models. For horizontal installation, it is recommended to install the switch horizontally downward at an angle of 15-20℃ to reduce the influence of materials.

⚙️【 POSITION OF SWITCH 】The switch should not be installed close to the feed opening to reduce blade damage and misuse. If the switch must be installed near the feed opening, a wide protective baffle should be installed 200 mm above the switch.

⚙️【 ATTENTION 】When the shaft length adjustable switch is disassembled in the field and the universal joint is connected to the drive shaft, the locking nut must be coated with glue and then locked with a wrench. The inlet port of the junction box must face downward and the fixing nut of the electric switch must be locked tight.