Leeb Hardness Tester Landtek HM-6561

Alat ukur kekerasan dalam satuan Leeb dari pabrikan Landtek

This digital hardness tester measures the hardness of sample material in terms of Hardness Leeb (HL). Its very handy portable, but powerful and versatile hardness tester for different kind of metallic materials including steel and cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminum, brass, Bronze and copper alloys with high accuracy, suitable for use under tough working conditions. Test can be at any angles, even upside down. Moreover, a thermal mini-printer can be attached to the meter for a fast on-site printing of results.

It can be used on die cavity of molds, bearings and other mass produced parts on production line, failure analysis of pressure vessel, steam generator and other equipment, heavy work piece, installed machinery and permanently assembled parts, testing surface of a small hollow space, material identification in the warehouse of metallic materials, rapid testing in large range and multi-measuring areas for large-scale work piece.

Leeb Hardness Testing Principle.
An impact body with a spherical test tip made of tungsten carbide is propelled against the sample surface by a spring force and then rebounds back. At a distance of 1mm from the sample surface, the impact and rebound velocity of the impact body are measured by the following method: A permanent magnet embedded in the impact body, when passing through the coil in its coil holder, induces in the coil an electric voltage proportional to the velocities of the magnet.

Features:

• Testing Features
• Palm size for narrow space
• Test at any angle, even upside down
• Direct display of hardness scales HRB, HRC, HV, HB, HS, HL
• Large memory could store 50 groups including single measured value, impact direction, material and hardness scale etc.
• User recalibration function allowed
• Average Times Setting
• Durable metal case and hardness scales
• D type Impact Device + D type Calibration block
• Large screen LCD, showing all functions and parameters. With backglight
• Battery information showing the rest capacity of the battery
• Optional Software to connect to PC for statistics and printing via RS232 port
• Manual or Auto power off

Specifications:

• Measuring range: 200-900L
• Impact Directions: up, down, horizontal, slanting up, slanting down
• Impact Device: D Will handle the majority of hardness testing applications. Weight: 75g
• Measuring materials: 9 different common materials
  • Steel and cast steel
  • Cold work tool steel
  • Stainless steel
  • Grey cast iron
  • Nodular cast iron
  • Cast aluminum alloys
  • Brass (copper-zinc alloys)
  • Bronze (copper-aluminum alloys/copper-tin alloys)
  • Wrought copper alloys
• Display: 12.5mm LCD with back light
• Accuracy: Display error ±0.8% at LD=900
• Conversion: HL-HRC-HRB-HB-HV-HSD
• With RS232C interface
• Memory: 50 Data can be stored and re-readable
• Work voltage: 3V (2 x 1.5V AAA size battery)
• Working temperature: -10~50°C
• Storage temperature:-30~60°C
• Relative humidity: =90%
• Dimension: 146 x 65 x 36mm
• Weight
  • Main Unit: 140g (not including batteries)
  • Test Workpiece: 6.2lbs
  • Whole Set with Hard Carrying Case: 8.5lbs (not including batteries)

Set Includes:

• 1 x Portable Leeb Hardness Tester
• 1 x Standard Test Block
• 1 x Small Support Ring
• 1 x Instruction Manual
• 1 x Carrying Case
• 1 x Cleaning Brush