Alat ukur kekerasan/ kepadatan Tekstil yang dirancang khusus untuk melakukan pengukuran kekerasan tekstil berdasarkan pengukuran kekuatan resistansi penetrasi bola terhadap spool di bawah beban pegas

====

To measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages etc.

* Convertible probe, the curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the flat end of the probe is suitable for the bobbin with a diameter greater than 400mm.

* With average calculate function.

* Peak value deposit function.

* Under-voltage alarm function.

* Use USB data output to connect with PC.

* Provide Bluetooth data output choice.

The principle used to measure textile hardness is based on measuring the resistance force of the penetration of a ball against the spool under a known spring load. The measuring principle is the same as for the Shore A hardness test.

Model：HT-6510T-5

Parameters：Tested Result/Mean Value/Max.Value

Indenter：Ball 5mmΦ

Convertible Probe：The curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the plane end of the probe is suitable for the bobbin with a diameter greater than 400mm

Area Of Application：For loosely wound bobbins of synthetic fibers and closely wound natural fibers, yarns and threads

Display Range：0-100H (hardness graduation marks)

Testing Range：10-90H (hardness graduation marks)

Resolution：0.1H

Accuracy：≤±1H

Battery Indicator：Low Battery Indicator

Auto Switch Off：√

Depth Of Indentation*：0-2.5mm

Test Pressure**：Approx. 12.5N

Measuring Spring Force*：0.55-8.065N

Scale Diameter：51mm

Working Face Radius：55mm (when using the curved end of the probe)