Ultrasonic Flow Meter bersertifikat kalibrasi dengan instrumen kalibrator Krohne OPTIFLUX, Germany

Flow Meter adalah alat untuk mengukur laju cairan. Jenis cairan yang diukur seperti air minum, air limbah, bensin, solar, alkohol, oli dll

Clamp On Ultrasonic Flow Meter ini mengukur untuk pipa ukuran DN15-DN40

- Instalasi dan pemakaian yang ringkas 

- Bisa utk berbagai jenis pipa

- Layar LCD besar untuk pembacaan

===

Pipe material : Metal /PVC, PP or PVDF rigid plastic pipe

Liquid type: Water/other liquid (Single liquid medium without solid particles or impurities)

Temperature range: 0-75℃ (No freezing on the surface)

Low velocity cut off value (Default by factory): 0.1m/s

Display: LCD 256*128

Response time: 0.5-60s

Accuracy: ±2%, (±1% after calibration)

Data Storage period: 300ms

Memory for data backup: EEPROM (Data storage: over 10 years, data read/write frequency: over 1 million times)

Power and I/O connection: M12 type aviation plug

Output: 4-20mA

Communication: Modbus RS485

Options for output: OCT (pulse output)/ One relay alarm (please contact the factory)

Power supply: 10-24V VDC

Electric power: <3w

Protective circuit: Power reverse connection protection, Power surge protection,

Output short circuit protection, Output surge protection

Enclosure protection class: IP65

Environment temperature: -10 to 60°C (No freezing)

Relative humidity: 35 to 85% RH (No condensation)

Vibration resistance: 10 to 55 Hz

Double amplitude 1.5 mm, 2 hours in each XYZ axis

Impact resistant

100 m/s2 16 ms pulse, 1000 times each for X, Y and Z axis

Main material: Aluminum, Industrial Plastics

Cable length: 2m(standard ), PT1000 sensor standard cable length is 9m