- Original Mr.Signal MR9270S+ dengan HART Protocol (Kami juga jual versi tanpa HART di etalase toko) 

- **Spesifikasi teknis bisa dicek di foto ke 3**



●  The MR9270S+HART adopts a high-speed ARM CPU, with strong performance, stable operation, and user-friendly interface.

●  Capable of simultaneously measuring and outputting signals (current, voltage, MV, frequency, resistance, thermocouple, thermal resistance, PT100)

●  With functions such as HART protocol, MODBUS protocol, paperless recorder, signal conversion, real-time curve, programming output, etc.

Parameter：

1. Built in 3.6V 2500mA polymer lithium battery; The standby time is about 20 hours; The usage time varies depending on the usage situation (20mA continuous output can reach 8-10 hours)

2. Working environment: 0 ° C-50 ° C.

3. Internal reverse and overcurrent protection; Protection voltage: 30V

4. Size: 97mm * 76mm * 33mm

5. Weight: 189 gram

Features:

1. HART communication protocol.

2. Simultaneously measure and output signals.

3. The current and voltage signals can be programmed for output, with two output modes.

The first mode: Set the starting point, ending point, and number of cycles to start working.

The second mode: advanced mode, where signal changes are all set by parameters.

4. Pre set values: 9 sets of commonly used signal values can be preset for fast output.

5. Convert the input signal into an output signal, for example: convert the input frequency signal into a current signal, and convert the input range from 0-1000Hz to 4-20mA.

6. Real time curve: The change trend of input and output signals can be displayed through a curve, the collection time of the curve can be set, and the curve can be automatically displayed within a certain time range of maximum and minimum values.

7. Conversion of engineering quantity display: The signal is displayed as a signal value or engineering quantity, and the signal value corresponds linearly to the engineering quantity. For example, a 4-20mA signal corresponds to 0-100, that is, 4mA corresponds to 0, 12mA corresponds to 50, and 20mA corresponds to 100. This range can be modified through parameters.

8. Modbus RTU remote control: It can communicate with configuration software or PLC through RS485 to achieve online setting of instrument output signals and monitoring of instrument input signals.

9. Modbus RTU master station: Conduct communication testing, parameter setting, parameter copying, online monitoring, and other operations on slave devices with RS485 MODBUS interface.

10. Modbus Rtu custom slave station: can simulate all types of variables of modbus devices for configuration software or PLC debugging

11. Instrument Toolset: As a functional extension of the instrument, such as a simple paperless recorder, PID controller, etc. Please pay attention to the product website for details, and this manual is not provided for description.

12. USB firmware upgrade: Upgrade new firmware to expand new features.

13. USB to Rs485: The instrument can be used as a USB to RS485 virtual serial port, and operating systems below WIN10 require the installation of drivers.