Alat Ukur kehalusan permukaan keramik, granit, marmer, kayu, kertas, hasil printing, metal, plastik, hasil cetak, hasil cat, dll

===

Widely used in building decoration materials, such as tiles, marbles, granite, ceramic, stone and other surface gloss measurement; bamboo, paper, plastic and other surface gloss measurement; a variety of non-metallic and metallic surface gloss measurement.

Technical index

Reading range 0 ~ 199.9gu

Measurement range 0 ~ 150.0gu

Index value 0.1gu

Indication error value + / - 1.2gu

Zero value error value 0.2gu

Stability 0.4gu

Projection angle 60 degrees

Power supply two 7 batteries

Weight 0.3KG

Size 129 * 45 * 73mm

WGG-60 (Series) meets international standard ISO-1813 and GB/T 9754. In line with the provisions of ASTM, D2457, ASTM, D523, and GB/T13891, GB/T 7706 and GB/T 8807 standards. Meet the requirements of the national 696-2002 JJG, "mirror gloss meter" and "gloss board" of the one or two meter measuring machine.

Operation:

1. Buttons:

ON/OFF boot, turn off the key

STORE storage key, ascending key

CHECK query key, down key

SET settings key

MEASURE measuring key, return key

2. Introduction to basic operation

2.1 measurement process

Boot, the interface shows "press the measuring key, work", the gloss meter measuring face quasi test items, press the "MEASURE" button, 2 seconds after reading the measurement value.

2.2 correction process

Boot interface display by measuring key, work ", press the SET button," backlight "and" correction "option, press the down key switch; according to the" correction "column, and then click" SET "," correction standard value, press the set button correction "will measure the export at the standard plate, put firm, flat, press" SET "button, the screen will display the correct value, adjust the up and down keys to the actual correction value, press the" SET "button to confirm the correction value.

3 backlight settings

Turn on the machine, press "SET", press the "up and down" button, select "back light", press "SET" button, then press the up and down key, to the corresponding backlight status, press the "SET" to confirm.

4. Notes:

4.1 in the course of operation, the instrument mouth, work board surface, object side should be kept clean; otherwise, it will cause measurement errors and correction. If there is dirt or dirt on the surface, please wipe it with a face cloth or a glass cloth dipped in anhydrous alcohol.

4.2 the measuring plane of the instrument is the measuring standard. No foreign matter can be adhered to, otherwise it will result in the accuracy of measurement.

4.3, calibration and measurement in the same environment, the temperature difference is too great to cause measurement errors.

4.4 avoid external light during use to prevent external light from affecting measurement accuracy.

4.5, the battery is not power, the battery must be replaced before it can be used, otherwise it will affect the accuracy of measurement.

4.6 the instrument has automatic shutdown function.

4.7 in order to make the measurement more accurate and eliminate the moisture and moisture in the optical electronic part, it is recommended to warm up for 3-5 minutes before using the machine