Refraktometer Kopi dengan rentang pengukuran

Kadar Brix Kopi 0-50%

Kadar TDS Kopi 0-25%

Alat yang praktis untuk komersial, industri F&B, hobi

====

Specifications:

Range:

Brix: 0-50% TDS:0-25%

Resolution: +- 0.02C

Accuracy: 0.1C

Ambient temperature: 10-100 degrees

Measurement Time: Approximately 1.5 seconds

Minimum Sample Volume: 2 metric drops

Light Source: Yellow LED

Sample Cell: Stainless steel ring and flint glass prism

Enclosure Rating: IP65

Battery Type / Life: 9V battery for +- 5000 readings

Auto-Off: After 3 minutes of non-use

Dimensions: 58*25*121mm

Weight: 350g

Product features

Coffee concentration with the range of 0-25%, Brix measurement with the range of 0-50% with temperature display

Calibration function and no need calibration every time; auto power off within one minute if no any operation

Provided with suction tube and spare protective cover

The function keys are simple, clear and easy to operate; high accuracy and durable

Digital screen with large display number, battery power can be displayed

Product description

1.Power On: Press key "READ" 1 second only.

2. Scale converting: press key "SCALE" 1 second to choose the unit Brixor Concentration, "S01" is for Brix %, this also can test all liquid with sugarsuch as juice, milky tea ect, range is 0-30%. "S02" is for coffeeconcentration, range is 0-25.

3. Measurement: Use suction tube takes some sample from the 1/2 deep ofthe cup (to avoid the cream or solid of the coffee), drip about 3~5 drops tothe sample plate, then cover it. Press key"READ" 1 second, meter will give the current value, ifpress key"READ" 2 seconds more, meter will make andcountdown 15 times' measurements, the reading is the average value.

4. Temperature unit converting: Press key "SCALE" more than 2 seconds,meter will display Celsius or Fahrenheit.

5. Calibration: No need calibration every time. Drip 3~5 drops distilledwater in sample plate, make sure the water and meter temperature is same andstandard temperature is 20ºC, then cover it. Press key "CAL" more than 2seconds until "CAL" flashing,press "CAL" key again, meter will display "END"and show 0.0%.

6. Power off: Meter will power off within one minute if no any operation.

7. Maintenance: Always clean and wash the sampleplate with distilled water and dry it with soft cleaning cloth, never use hard thingsto clean, otherwise it will damage the prism glass.

packing listPacking List:

1*Refractometer with retail box

1*Shading cover

1*Pipette

1*English instruction manual