Hardness Tester dengan metode goresan pensil dari pabrikan Landtek

Biasa digunakan untuk mengukur kekerasan coating, cat dll

====

Coating hardness is the necessary measurement for the performance of coatings. This instrument applied the pencil scratch method. It is a fast and economical way to determine the film hardness using the drawing lead core or the pencil core. The pencil scratch method for coating hardness testing is a common method in the world since the 1980s. The instrument can be used both in laboratory, and on site.

Measurement Principle

The Pencil Hardness Tester applies mechanical measurement. Keep three point touch the coating (two wheel, a pencil core), and a 45 degree angle between pencil and test surface. Push the instrument sliding, pencil draws the corresponding track in the coating. In the change of different pencil marks, the hardness value of the film can be determined.

Load Weight: 1000g / 750g / 500g

Measurement Angle: 45° (Between Pencil and Measured Surface)

Three Touch Points: Two Wheels, a pencil core

Scratch Speed: About 1 mm/s

Standard Accessories

1. Pencil Hardness Tester

2. 1000g, 750g, 500g Weight

4. Pencils (6B-6H)

5. Eraser

6. Knife

7. Horizontal Pad Block

8. Sandpaper

Standards

GB/T 6739-96 Coating Hardness Pencil Test Method

ASTM D3363-00 Standard Test Method for Determination of Coating Hardness by Pencil Test Method

GB/T 1727-92 General Method for Preparing Film

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Pencil Hardness Tester Landtek HT6510P

Brand: Landtek
Product Code: HT6510P
Reward Points: 200
Availability: In Stock

Rp1,500,000

Available Options

Select

Qty

0 reviews / Write a review

Write a review

Pencil Hardness Tester Landtek HT6510P

Rp1,500,000

Available Options

Related Products

Hardness Tester Landtek HT-6510D

Foam Hardness Tester Landtek HT6510F

Durometer Shore D - Hardness Tester

Durometer Shore A - Hardness Tester

Durometer Shore C - Hardness Tester