Glossmeter digunakan untuk mengukur kehalusan/ kemulusan permukaan:

-Hasil cat, hasil cetak tinta

-Keramik, granit, marmer, polesan

-Kertas, plastik dll

(Video demo pemakaian ada dibawah)

Mudah digunakan, portable, mudah dikalibrasi kapanpun (dgn pad yg tersedia)

-----------------------

MANUFACTURER DESCRIPTION:
1.Introduction:
ETB-0686 glossmeter is in compliance with international standard ISO2813,ASTM D523 and state standard GB9754-88,GB9966.5.
The device meets JJG696-2002 standard (Lens Luster Degree Instrument Measure Test Regulations).

Features:
    Self-calibration, no need to be hand adjusted
    Calibrated to provided standard (calibration tile)
    Intelligent design. Simple to use
    Long life-span lamp-house
    Lightweight and portable to carry
    International Standard ISO2813, ASTM D523 (USA)
    Automatic shut down
    LCD digital display
    Precise measurements, excellent repetition performance
    Have electrical source pressure shortage indication function

2.Application
    All kinds of coating and finishing surfaces, such as paints, varnishes, printing ink
    Decorative materials, such as marble, granite, polishing brick, ceramic tile and so on
    The other kinds of materials and objects, such as plastic, woodenware, paper, etc

3.Parameters:
    Measure range:0-200Gu
    Accuracy: <±1.2Gu
    Repeatability: ± 0.5 Gueba
    Projecting angle: 60°
    Size: 120 mm×90 mm× 40 mm
    Weight: 300 g
    Stability: ±0.4Gu/30min
    Power supply: 3V (2x AAA batteries)
    Environment temperature: 0-40
    Relative humidity: ≤ 85%

4.Usage Method:
    - To turn on the device press the RED button
    - Choose the projecting angle, the screen scroll displays 20°, 60°and 85° triangle degree, press the “OP” key to confirm angle choice when the targeted angle displaying on the roll display according to the measurement needs (Single angle instrument without this operation)
    - When the instrument prompts "adjustment operation" , “CAL OK?” is displayed in the screen, make the instrument measure window pointing at the adjustment panel, press the YELLOW key to confirm adjustment operation, the instrument identify the adjustment panel automatically, and adjust automatically , there is buzz sound after finishing it
    - After finishing adjustment operation, the instrument is entering into the measure state. Put the instrument on the measured sample, appoint the measure window to the measured object, press the YELLOW key, the instrument starts to measure, the luster degree value of the measured object will display on the screen while there is buzz sound, please note that the sample should be leveled off
    - To turn off press RED button. If there is no acitivity after 5 minutes, the device will automatically shut down